LoginNew at BAS Trucks? Create an account
Delivery toNetherlands?We deliver in1 Day!
Are you interested in one of these parts?
Contact us 0413 371 788
- Cooling system
- Cooling pump
- Cooling Unit
- Thermostat and accessories
- Visco fan
- Door panel
- Heat and cooling
- Steering wheel
- Electronics interior
- Kitchen appliances
- Radio and multimedia
- Stationary cooler
- Parking heater
Cylinderheads for trucks
The cylinder head is part of the engine of a truck. The cylinder head is on top of the cylinder block and functions as a seal for the cylinders. The valves and camshafts are also located in a modern cylinder head. A damaged cylinder head often causes compression loss and must therefore be replaced immediately.
Parts is added to favorites
HistoryUntil about 1940, so-called 'flathead' or 'sidevalve' engines were mainly present in motorized vehicles. Certainly in America flat-head engines have been used for a long time. Until about the second world war. Then the so-called OHV (Overhead Valves) system prevailed. A flathead engine actually means that the cylinder head only serves as a seal. The valves for intake and exhaust air are then located on the side of the cylinders, in the engine block. Today, only small 1 or 2 cylinder engines for lawn mowers still use this system.
The disadvantages of a flathead engine are enormous compared to the only advantage: simplicity. The biggest disadvantages are the poor air flow, poor ignition and low compression. The emission is high due to the poor ignition.
In many older engines with an OHV system, an underlying camshaft is used. The camshaft then operates the valves with push rods and tumblers. Truck engines also often use this system.
Modern cylinderheadsNowadays, a cylinder head is a complicated piece of technology where many air flows and movements take place. The underlying camshaft has made way for the overhead camshaft, also called OHC (Overhead camshaft).
We like to inform you about our stock and special offers!
About BAS Parts
8.6 / 10 - 262 reviews
© Copyright BAS Parts | Mac Arthurweg 2c, 5466 AP, Veghel, The Netherlands | Tel. 0413 371 788